整改情况英语
1. 请帮忙翻译下这篇英文整改计划
Corrective plan
In big cities, there are always some disorderly throw litter of phenomena that leaflet is most important. Now, all over the sky is dancing leaflets, they almost covering the street, a very bad. According to the survey, leaflets components are 100% log pulp, if according to this speed consumption down, a city of economic ethnics-people, not to mention one year, is a month can also for leaflet consume dozens of tree growth of more than 10 trees, this is how terrible! Therefore, I suggest relevant departments, fully recycle these flyers and for disorderly throw litter of merchants certain of punishment.
2. 要求工厂立即整改 英语
我们需要一些时间跟工厂检查并作出一些整改,以确保这个他们可以符合这检验标内准.
是的容,这个产品是外面哑光,内部亮光,以及这颜色可以修改,根据你的要求.
We need some time for our factory to do the test and carries out some modification, in order to ensure that they are up to the test standard.
It's correct, this proct's outside is dim but inside is bright, also its colours can be altered according to your requirement.
这次没有收到你的求助,但亦顺便替你翻译了.
【很希望我的回答会对你有帮助.如有不明白,可以再追问,若满意请采纳,谢谢你,并祝你进步!】
3. 制定整改方案用英语怎么讲
make rectification and improvement plans
4. 制定整改方案用英语怎么讲
Established
modification
program
希望能帮到你，要是答案还满意的话，记得采纳哦，O(∩_∩)O谢谢~！
5. 整改措施的英文
corrective action
6. 对某事进行整改的整改英文怎么说
re-management
7. 审计整改 英语
中文就不严谨.是内部审计+内部整改,还是对内部审计加以整改?另外,试一试 overhaul 这个词
8. 整改 英语怎么说
整改：就是整顿和改革
to renovate within the limiting time
限期整改
9. “整改”的英文怎么说
corrective/correction report整改报告
10. 请帮忙翻译成英文，SMT整改报告
如下,不过以我这么多年的QM经验,这种分析我并没有看到确实有效的分析方法和根本原因验证.要是我是客户或者你们的品质经理的话,这个报告我是不会接受的.呵呵~~
Root cause:
The root cause of the customer complaint has identified as improper manual soldering, as a high amount of solder flux is observed around the U1 of picture SN4, there is significant trace of touching up manually.
The U1 was auto mounted in proction, the stencil aperture is also found no issue. however, few of the via hole was found connected to the grounding hole at the central of PCB, this could result insufficient ring reflwo.
Occurrence:
We are currently performing visual inspection for nonwetting issue, operation error caused escape.
Containment:
No Finished goods or WIP on hand
Action:
1. Remove the via hole to avoid solder paste flow away, relay the reference point (参考点有不同叫法)
2. Optimize the stencil by larger the aperture
3. Enhance operator ability to capture the nonwetting or misalignment, especially components around U1. update work instruction accordingly
4. Perform testing by follow customer requirement.