整改單翻譯

㈠ 「整改」的英文怎麼說

corrective/correction report整改報告

㈡ 審計整改 英語

中文就不嚴謹.是內部審計+內部整改,還是對內部審計加以整改?另外,試一試 overhaul 這個詞

㈢ "綜合辦公室培訓整改"英文怎麼翻譯

reform of comprehensive office training

希望可以幫到你~~

㈣ 質檢單,質量整改單,退貨單的英文怎麼說 啊啊啊

質檢單,質量整改單,退貨單
Quality check list,the quality be whole to change list,back invoice

㈤ "限期整改」如何翻譯

rectification/reform within a prescribed time limit

需要更多來的上下文才好確源定是用rectify還是rectification更合適。如果用名詞還需考慮使用合適的動詞搭配，比如demand， require、undergo等等

虛擬大蟲：很久不見了哦！

㈥ 求翻譯：附件是不符合項整改報告，請查收.是什麼意思

翻譯成中文意思是:The annex is a non - Conformance correction report. Please check it.

㈦ 整改 英語怎麼說

整改：就是整頓和改革
to renovate within the limiting time
限期整改

㈧ 質檢單，質量整改單，退貨單的英文怎麼說

質檢單，質量整改單，退貨單
Quality check list, the quality be whole to change list, back invoice

㈨ 請幫忙翻譯成英文，SMT整改報告

如下,不過以我這么多年的QM經驗,這種分析我並沒有看到確實有效的分析方法和根本原因驗證.要是我是客戶或者你們的品質經理的話,這個報告我是不會接受的.呵呵~~

Root cause:
The root cause of the customer complaint has identified as improper manual soldering, as a high amount of solder flux is observed around the U1 of picture SN4, there is significant trace of touching up manually.
The U1 was auto mounted in proction, the stencil aperture is also found no issue. however, few of the via hole was found connected to the grounding hole at the central of PCB, this could result insufficient ring reflwo.
Occurrence:
We are currently performing visual inspection for nonwetting issue, operation error caused escape.
Containment:
No Finished goods or WIP on hand
Action:
1. Remove the via hole to avoid solder paste flow away, relay the reference point (參考點有不同叫法)
2. Optimize the stencil by larger the aperture
3. Enhance operator ability to capture the nonwetting or misalignment, especially components around U1. update work instruction accordingly
4. Perform testing by follow customer requirement.

㈩ 內部審計整改的英文翻譯在外文文獻中怎麼用

中文就不嚴謹。是內部審計+內部整改，還是對內部審計加以整改？另外，試一試 overhaul 這個詞